High temperature and heat resistant UHMWPE rods and sheets
Providing heat resistant UHMWPE, injection molding particles, UHMWPE plates/rods/films/sheets etc.
Product name：High temperature and heat resistant UHMWPE rods and sheets
Raw material category: UHMW-PE
Model: UHM-1000HSL
Product specifications: rods and sheets
Material properties: low friction coefficient, self-lubricating, noise reduction, long-term heat resistance of 110℃.
Product application: seals, bushings, etc.
High temperature and heat resistant UHMWPE UHM-1000HSL has a higher working temperature than conventional UHMWPE to 110°C. It can meet the working conditions of seals, guide rails, and food processing sleeves. It can replace PVDF in some working conditions and has excellent wear resistance, no peeling, and no powdering.
High temperature and heat resistant UHMWPE UHM-1000HSL fully complies with FDA food requirements. Compared with traditional PTFE materials, it absolutely does not contain PFAS and is the best alternative for food processing.
The excellent properties of UHM-1000HSL are as follows:
a: Particularly high notch impact strength
b: High energy absorption capacity under high stress rate
c: Excellent wear resistance
d: Low friction coefficient
e: Very high chemical resistance to acids, alkalis and corrosive gases
f: High resistance to environmental stress cracking
g: Wide operating temperature range from -200°C to 110°C
h: Low density, 52% of PVDF plastic and 42% of PTFE powder (same grade wear-resistant materials). The same quality of materials can produce more products, with obvious cost advantages.
Our company specializes in providing UHM-1000HSL high temperature resistant UHMWPE, injection molding UHMWPE particles, UHMWPE plates and rods, UHMWPE films and sheets, etc., and provides free samples and technical assistance. Product information and product certificates can be obtained from our sales.
